initial temperature
英 [ɪˈnɪʃl ˈtemprətʃə(r)]
美 [ɪˈnɪʃl ˈtemprətʃər]
初温；起始温度
双语例句
- Pre-cooling efficiency was correlated negatively with initial temperature, flesh thickness and melon to water ratio, but was positively with specific surface area of the fruits.
预冷时间与果实初始温度、果肉厚度和冷却介质比例均呈正相关关系，与果实比表面积呈负相关关系。 - When references experience a temperature change and return to the initial temperature, they do not always have the same initial OUTPUT voltage.
当基准（器件）经历一个温度变化且返回初始温度，它们并非总能获得与初始电压相同的电压。 - Combustion characteristics of natural gas at various initial temperature and pressure
天然气在不同初始温度和压力下的燃烧特性研究 - Upper incipient lethal temperature of short term thermal shock of two species of copepods ( 2) Initial temperature of catalyst bed is wholly too high.
两种桡足类短期热冲击的高起始致死温度值（2）提高起始反应温度使催化剂床层温度整体过高导致飞温。 - The bigger plate thickness is and higher the initial temperature is, the quicker temperature drop is.
轧件越厚，起始温度越高，温降速度越快。 - Initial temperature of catalyst bed is wholly too high.
提高起始反应温度使催化剂床层温度整体过高导致飞温。 - If the water for making tea is too hot, tea leaves will be spoiled and tea liquor will turn to dark yellow very quickly. ( 2) Initial temperature of catalyst bed is wholly too high.
泡茶时，如果使用水的温度过高，会使茶叶泡熟，茶汤很快变黄。（2）提高起始反应温度使催化剂床层温度整体过高导致飞温。 - The lower the initial temperature, the slower the start of active fermentation.
最初的温度较低，发酵慢开始活跃。 - The simulation results show that the contact electrical resistance plays a dominant role in the initial temperature field.
结果表明，在烧结初期，接触电阻在升温过程中起到至关重要的作用； - Influence of Initial Temperature Distribution on Residual Stresses of Hot-leveled TMCP Plate
热矫初始温度分布对TMCP钢板残余应力的影响 - So I'll start at some initial temperature, T1.
那么我从某个初始温度T1开始。 - The initial temperature of the water in the beaker is also the same as in the experiment.
烧杯里的水的最初温度与上述实验的水的最初温度相同。 - The initial temperature of solid heat carrier has great influence on the gas composition.
热载体初始温度对热解气组成影响显著。 - The morphology of intermetallic compounds is strongly influenced by initial temperature of solder droplet.
钎料与焊盘界面产生的金属间化合物形态受钎料熔滴初始温度影响很大。 - The preparation conditions of fast sol gel process, the gelation initial temperature, the burning temperatures and the burning time were studied.
研究了溶胶-凝胶制备过程的条件并提出凝胶化起始温度的控制问题，对降低煅烧温度和缩短煅烧时间也进行了实验。 - With the increasing initial temperature, a continuous AuSn_2 and needle-like AuSn_4 formed at the interface.
随着滴落钎料初始温度的提高，界面层由Au层基本不反应，变为形成了连续层状AuSn2及针状AuSn4。 - The Influence of Doping Concentration and Initial Temperature on the Stress Distribution of Heat Capacity Lasers
掺杂浓度和初始温度对热容激光器应力分布的影响 - However, the pressure response of CMT is mainly affected by the initial temperature of CMT.
实验发现，CMT内温度分布和凝结特性主要受PRZ初始压力和CMT初始温度的影响，而压力响应主要受CMT初始温度影响。 - The results show that hydrogen can increase flame speed, and even more when the initial temperature becomes higher;
结果表明：氢气能使火焰传播速度大幅提高，且当初始温度升高时，氢气对火焰传播速度的提高作用增大； - Meanwhile, the methods of getting the initial temperature and the fitness function are discussed.
对初始温度的确定方法和获得适应度函数的方法进行了探讨； - It designed initial temperature, neighborhood structure and random acceptive function, the paper improved the speed of solving process;
设计了初始温度、邻域结构和随机接受函数，提高了求解速度； - The gas flux was markedly influenced by initial temperature, and was decreased obviously with the existence of limestone.
初始热解温度对热解气体产物的流量影响显著。在加入石灰石作为催化剂后，生物质热解液体产物量明显减少。 - More moisture content and higher soil initial temperature are favorable to the design and operation of GSHP systems.
当土壤含湿量大、土壤初始温度高时，对于系统的设计与运行是有利的。 - This essay mainly specifies the impacts of the blade cooling technique on the turbine initial temperature.
着重叙述的是叶片的冷却技术对提高透平初温的影响。 - Contact pressure and initial temperature are both significant factors for contact heat transfer coefficient.
压强和温度是影响瞬态接触换热系数的重要因素。 - The volumetric density can be improved by increasing the supercharge pressure as the initial temperature is reduced.
在降低充量初始温度的条件下，可以通过提高增压压力，提高充量密度。 - In order to obtain universal results, dimensionless analyses on the effects of wall temperature and initial temperature of phase change material on the melting and solidification processes are carried out.
为得到具有普遍意义的结果，进行了管壁温度和相变材料初温对融化、凝固过程影响的无量纲分析。 - Morphology and distribution of interfacial Au-Sn compound was different with the increment of initial temperature of solder droplet.
随着熔滴初始温度的提高，钎料熔滴与焊盘反应形成的Au-Sn化合物形态及分布不同。 - The relation between solidification initial temperature and ultrasonic power is quantitatively determinate.
通过数学分析定量的得到超声波处理过程凝固初始温度与功率的关系。 - When the cooling water initial temperature is higher, the bearing temperature will rise accordingly.
当冷却水初始温度比较高时，轴承温度会相应升高。